At Manningham Medical Centre, you can find all the data about Precipitates In Biomedical Co-Cr-Mo-C-N-Si-Mn Alloys. We have collected data about general practitioners, medical and surgical specialists, dental, pharmacy and more. Please see the links below for the information you need.


Precipitates in Biomedical Co-Cr-Mo-C-N-Si-Mn Alloys

    https://link.springer.com/article/10.1007/s11661-011-1009-0
    As a result, precipitates in biomedical Co-Cr-Mo alloys were studied by several research groups including ours.[7–16] We reported on the phases and dissolution …

Precipitates in Biomedical Co-Cr-Mo-C-N-Si-Mn Alloys

    https://link.springer.com/content/pdf/10.1007/s11661-011-1009-0.pdf
    precipitates in Co-Cr-Mo-C[7] and Co-Cr-Mo-C-Si-Mn[8,9] system alloys under as-cast condition and after heat treatment at 1448 to 1548 K (1175 to 1275 °C). The precipitate …

Precipitates in Biomedical Co-Cr Alloys | SpringerLink

    https://link.springer.com/article/10.1007/s11837-013-0567-6
    Precipitates in Biomedical Co-Cr-W-Ni Alloys The Co-28Cr-6Mo (ASTM F75 and F1537/F799) alloy is categorized as a low-stacking-fault energy (SFE) material. …

Precipitates in Biomedical Co-Cr-Mo-C-N-Si-Mn Alloys

    https://www.semanticscholar.org/paper/Precipitates-in-Biomedical-Co-Cr-Mo-C-N-Si-Mn-Alfirano-Mineta/63e26634813a334e45828921bcc4d002669b5217
    A blocky-dense π-phase precipitate and a lamellar cellular colony, which consisted of an M2X type precipitate and a γ phase, were mainly detected in the as-cast alloys with and …

Precipitates in Biomedical Co-Cr-Mo-C-N-Si-Mn Alloys

    https://ui.adsabs.harvard.edu/abs/2012MMTA...43.2125A/abstract
    The heat treatment temperatures and holding periods employed ranged from 1448 to 1548 K (1175 to 1275 °C) and 0 to 43.2 ks, respectively. A blocky-dense π-phase …

Precipitates in biomedical Co-Cr-Mo-C-Si-Mn alloys

    https://www.researchgate.net/publication/257706612_Precipitates_in_biomedical_Co-Cr-Mo-C-Si-Mn_alloys
    Moreover, biomedical CCM alloys are always accompanied by primary precipitates such as intermetallic compounds, carbides, nitrides, and carbonitrides, …

Precipitates in Biomedical Co-Cr-Mo-C-Si-Mn Alloys

    https://www.semanticscholar.org/paper/Precipitates-in-Biomedical-Co-Cr-Mo-C-Si-Mn-Alloys-Narushima-Alfirano/7624141e531ae36e8e41035c83ee18747fa00d4c
    The precipitates observed in the as-cast and heat-treated alloys were carbides (M23C6 type, h-phase, and p-phase) and an intermetallic compound (c-phase). The main precipitates …

Precipitates in Biomedical Co-Cr Alloys | Request PDF

    https://www.researchgate.net/publication/257761668_Precipitates_in_Biomedical_Co-Cr_Alloys
    Mostly, the precipitates in the alloys are of the σ-phase, M23X6-type phase, η-phase (M6X-M12X type), π-phase (M2T3X type), χ-phase, M7X3-type phase, or M2X …

Precipitates in Biomedical Co-Cr-Mo-C-Si …

    https://www.scientific.net/AMR.277.51
    The precipitates observed in the as-cast and heat-treated alloys were carbides (M 23 C 6 type, h-phase, and p-phase) and an intermetallic compound (c-phase). The main …

Precipitates in Biomedical Co-Cr-Mo-C-N-Si-Mn Alloys

    https://ibook.pub/precipitates-in-biomedical-co-cr-mo-c-n-si-mn-alloys.html
    In biomedical Co-Cr-Mo alloys containing nitrogen, the formation of M23C6 type,[17,18] η-phase (M6C),[17] and Cr2X[19,20] precipitates was reported. However, the effect of …



Need more information about Precipitates In Biomedical Co-Cr-Mo-C-N-Si-Mn Alloys?

At Manningham Medical Centre, we collected data on more than just Precipitates In Biomedical Co-Cr-Mo-C-N-Si-Mn Alloys. There is a lot of other useful information. Visit the related pages or our most popular pages. Also check out our Doctors page.